2INCH STRONGROOM DOOR
2inch Strongroom Door
The doors are specially designed and constructed to resist against high speed drills, force and fire.
External Dimensions (mm)
2110(H) x 1273(W)
Clear Opening (mm)
1920(H) x 814(W)
Wall Opening (mm)
2060(H) x 1070(W)
Wall Thickness (mm)
200 (inclusive of Plastering)
Approx. Net Weight (kg)
640 (Door) and 20 (Gate)
Product Benefits:
- Solid door slab with a protective thickness of 50mm (2″) forms the basis of the door, which has an overall thickness of 185mm.
Filled with special formulated Chubbsafes barrier material reinforced with steel fibres provides resistant to high speed drilling, oxy-acetylene cuttings and jack attacks - Secured by 7 active front bolts, 2 active top bolts, 2 active bottom bolts and 7 passive back bolts. Each bolt has a diameter of 3zmm.
- Fire Resistance tested in according to B5476 Part 22:1987 Fire Test on Building Material and Structure for a 120 minutes fire resistant rating
- Secured by a 3-wheel Keyless Combination Lock and a 8-lever double bitted Key Lock as standard. Both locks operated independently.
- The Keyless Combination Lock is protected by Glass Relockers.
Any forced attempt to dislodge the locks would activate relocker and restricts the movement of the internal boltwork system. - Relocker is further protected by drill resistant hard plates.
- The door comes standard with a painted grey primer based finish
3 1/2 INCH STRONGROOM DOOR
3 1/2 inch Strongroom Door
3.5″ Strongroom Doors are specially designed to meet the demands for a high security installation. Constructed to resist against modern cutting tools such as high speed drills, force and fire.
External Dimensions (mm)
2110(H) x 1312(W)
Clear Opening mm
1920(H) x 814(W)
Wall Opening (mm)
2080(H) x 1150(W)
Wall Thickness (mm)
300 (inclusive of Plastering)
Approx. Net Weight (kg)
740 (Door) and 20 (Gate)
Product Benefits:
- Solid door slab with a protective thickness of 89mm (3½”) forms the basis of the door which has an overall thickness of 226mm.
Filled with special formulated barrier material reinforced with steel fibers provides resistant to high speed drilling, oxyacetylene cuttings and jack attacks. - Secured by 7 active front bolts, 2 active top bolts, 2 active bottom bolts and 7 fixed rear bolts. Each bolt has a diameter of 50mm.
- Secured by a 3-wheel Keyless Combination Lock and a 11-lever double bitted Key Lock as standard. Both locks operated independently.
- Protected by two Glass Relockers. Any forced attempt to dislodge the locks would activate relocker and restricts the movement of the internal boltwork system.
- Relockers are further protected by Chubbsafes patented Torch and drill resistant (TDR)material.
- The “wrapped around the wall” door frame is fabricated from steel sections, bent to form a single structure. Vestibule side frames at full height of the door are attached to the frame and grip the inside of the wall. This design provides stronger resistance against attacks to the door.
4 1/2 INCH VAULT DOOR
4 1/2 inch Vault Door
The most widely used Vault Doors in high risk security application, high security protection against modern methods of burglary attack for your valuables. State of Art Construction using the latest barrier material.
External Dimensions (mm)
2110(H) x 1330(W)
Clear Opening (mm)
1920(H) x 814(W)
Wall Opening (mm)
2080(H) x 1150(W)
Wall Thickness (mm)
300 (inclusive of Plastering)
Approx. Net Weight (kg)
1210 (Door) and 20 (Day Gate)
Product Benefits:
- Solid door slab with a protective thickness of 114 mm (4½”)
forms the basis of the door, which has an overall thickness of 251 mm. A specially formulated barrier material reinforced with steel fibers provides resistance to high speed drilling, oxy-acetylene cuttings and jack attacks - Secured by 7 heavy cylindrical bolts, 2 top bolts and 2 bottom bolts securing all 4 sides of the door. The horizontal through bolts extend throughout the full width of the door. Each bolt has a diameter of 38mm
- The door comes with a painted grey primer based finish
- The “wrapped around the wall” door frame is fabricated from steel sections, bent to form a single structure. Vestibule side frames at full height of the door are attached to the frame and and grip the inside of the wall. This design provides stronger resistance against attacks to the door
- Lighting Control Switch- A relay micro switch is fitted to the door to control the electric lighting in the room and to ensure that when the door is closed, all lighting within the room is switched off
- Alarm Micro Switch – A relay micro swith is fitted to the door for possible connection to the main intruder alarm system as an additional protection